Publication:

Caracterización mecánica a tensión de impresiones 3D de PLA y ABS modeladas por deposición fundida

Sood, R. Ohdar y S. Mahapatra, «Experimental investigation and empirical modelling of FDM process for compressive strength improvement,» Journal of Advance Research, vol. 3, nº 1, pp. 81-90, 2 Junio 2011.

K. V. Wong y A. Hernandez, «A Review of Additive Manufacturing,» ISRN Mechanical Engineering, vol. 2012, p. 10, 2012.

T. D. Ngo, A. Kashani, G. Imbalzano, K. Nguyen y D. Hui, «Additive manufacturing (3D printing): A review of materials, methods, applications and challenges,» Composites Part B: Engineering, vol. 143, pp. 172-196, 2018.

G. Cicala, A. Latteri, B. Del Curto, A. Lo Russo, G. Recca and S. Fare, "Engineering thermoplastics for additive manufacturing: a critical perspective with experimental evidence to support functional applications," JABFM, p. 9, 2017

K. Chua, K. F. Leong y C. S. Lim, Rapid prototyping: principles and applications, World Scientific Publishing Company, 2010

K. Cooper, Rapid prototyping technology: selection and application, CRC Press, 2001

L. Ventola, «Medical applications for 3D printing: current and projected uses,» Pharmacy and Therapeutics, vol. 39, nº 10, p. 704, 2014.

«Rengier, Fabian; Mehndiratta, Amit; Von Tengg-Kobligk, Hendrik; Zechmann, Christian M; Unterhinninghofen, Roland; Kauczor, H-U; Giesel, Frederik L,» International journal of computer assisted radiology and surgery, vol. 5, nº 4, pp. 335-341, 2010.

H. Dodziuk, «Applications of 3D printing in healthcare,» Polish journal of cardio-thoracic surgery, vol. 13, nº 3, p. 283, 2016

B. Lu, D. Li y X. Tian, «Development trends in additive manufacturing and 3D printing,» Engineering, vol. 1, nº 1, pp. 85-89, 2015.

S. C. Joshi y A. A. Sheikh, «3D printing in aerospace and its long-term sustainability,» Virtual and Physical Prototyping, vol. 10, nº 4, pp. 175-185, 2015.

B. Berman, «3-D printing: The new industrial revolution,» Business horizons, vol. 55, nº 2, pp. 155-162, 2012.

Canessa, C. Fonda, M. Zennaro y N. Deadline, «Low-cost 3D printing for science, education and sustainable development,» Low-Cost 3D Printing, vol. 11, 2013.

B. G. Compton y J. A. Lewis, «3D-printing of lightweight cellular composites,» Advanced materials, vol. 26, nº 34, pp. 5930- 5935, 2014.

X. Wang, M. Jiang, Z. Zhou, J. Gou y D. Hui, «3D printing of polymer matrix composites: A review and prospective,» Composites Part B: Engineering, vol. 110, pp. 442-458, 2017

J. H. Martin, B. D. Yahata, J. M. Hundley, J. A. Mayer, T. A. Schaedler y T. M. Pollock, «3D printing of high-strength aluminium alloys,» Nature, vol. 549, nº 7672, p. 365, 2017.

C. W. Visser, R. Pohl, C. Sun, G.-W. Romer, B. Huis in ‘t Veld y D. Lohse, «Toward 3D printing of pure metals by laser-induced forward transfer,» Advanced materials, vol. 27, nº 27, pp. 4087-4092, 2015.

C. Gosselin, R. Duballet, P. Roux, N. Gaudilliere, J. Dirrenberger y P. Morel, «Large-scale 3D printing of ultra-high performance concrete--a new processing route for architects and builders,» Materials & Design, vol. 100, pp. 102-109, 2016.

Bos, R. Wolfs, Z. Ahmed y T. Salet, «Additive manufacturing of concrete in construction: potentials and challenges of 3D concrete printing,» Virtual and Physical Prototyping, vol. 11, nº 3, pp. 209-225, 2016.

R. Trombetta, J. A. Inzana, E. M. Schwarz, S. L. Kates y H. A. Awad, «3D printing of calcium phosphate ceramics for bone tissue engineering and drug delivery,» Annals of biomedical engineering, vol. 45, nº 1, pp. 23-44, 2017.

Vorndran, M. Klarner, U. Klammert, L. M. Grover, S. Patel, J. E. Barralet y U. Gbureck, «3D powder printing of beta-tricalcium phosphate ceramics using different strategies,» Advanced Engineering Materials, vol. 10, nº 12, pp. B67-B71, 2008.

C. Minas, D. Carnelli, E. Tervoort y R. Studart, «3D printing of emulsions and foams into hierarchical porous ceramics,» Advanced Materials, vol. 28, nº 45, pp. 9993-9999, 2016

T. T. Wohlers, 3D Printing and Additive Manufacturing, State of the Industry, Annual Worldwide Progress Report, Wohlers Associates Incorporated, 2014.

B. Redwood, F. Schffer y B. Garret, The 3D Printing Handbook: Technologies, design and applications, 3D Hubs, 2017

N. G. Tanikella, B. Wittbrodt y J. M. Pearce, «Tensile strength of commercial polymer materials for fused filament fabrication 3D printing,» Additive Manufacturing, vol. 15, pp. 40-47, 2017.

B. Tymrak, M. Kreiger y J. M. Pearce, «echanical properties of components fabricated with open-source 3-D printers under realistic environmental conditions,» Materials & Design, vol. 58, pp. 242-246, 2014.

J. R. C. Dizon, A. H. Espera Jr, Q. Chen y R. C. Advincula, «Mechanical characterization of 3D-printed polymers,» Additive Manufacturing, vol. 20, pp. 44-67, 2018.

J. T. Cantrell, S. Rohde, D. Damiani, R. Gurnani, L. DiSandro, J. Anton, Young, ie, A. Jerez, D. Steinbach, C. Kroese y others, «Experimental characterization of the mechanical properties of 3D-printed ABS and polycarbonate parts,» Rapid Prototyping Journal, vol. 23, nº 4, pp. 811-824, 2017.

D. F. Adams, L. A. Carllsson y R. B. Pipes, Experimental characterization of advanced composite materials, CRC Press, 2002.

ASTM International, ASTM D3039 Standard Test Method for Tensile Propeties if Polymer Matrix Composite Materials, ASTM, 2002.

Prusament, «Green PLA Filament for 3D printing,» [En línea]. Available: https://shop.prusa3d.com/en/filament/40-greenpla-filament-1kg.html. [Último acceso: 15 Marzo 2018].

Prusament, «Blue EasyABS filament for 3D printing,» [En línea]. Available: https://shop.prusa3d.com/en/filament/57- blue-easyabs-filament-1kg.html. [Último acceso: 15 Marzo 2018].

ASTM Internacional, ASTM E111 Standard Test Method for Young`s Modulus, Tangent modulus, and Chord Modulus, ASTM, 1997.