Publication:
Mezclas asfálticas tibias. Énfasis en tecnologías de espumado y uso de RAP

Thumbnail Image
Files

Files

Mezclas asfálticas tibias. Énfasis en tecnologías de espumado y uso de RAP.pdf (12.5 MB)
View Statistics
Reference Managers
Mendeley
Indexers
Google Scholar CORE
QR Code
QR Code
Authors

Authors

Campagnoli Martinez, Sandra Ximena
Abstract (Spanish)
En este artículo se exponen los principales aspectos asociados con las tecnologías de mezclas asfálticas tibias (WMA, por sus siglas en inglés), se presentan sus ventajas y limitaciones, así como la forma más común de clasificación, describiéndolas de manera general, pero haciendo especial énfasis en aquellas tecnologías en que se trabaja con la inyección de agua para el espumado del asfalto - previniendo el desarrollo de estudios sobre este técnica - en los laboratorios de la Escuela Colombiana de Ingeniería, dada la disponibilidad de una planta piloto para fabricar asfalto espumado. Igualmente, se presentan aspectos relacionados con el diseño, se resumen las principales características y propiedades de desempeño, y se hacen consideraciones sobre el empleo del RAP en la WMA. Por último, se presentan algunas conclusiones y se dan recomendaciones orientadas a la implementación de las tecnologías de WMA en Colombia.
Abstract (English)
In this article the main aspects associated with warm asphalt mixtures technologies are detailed; we discuss tjeir advantages and limitations, as well as the most common ways of classifying, with general descriptions but with a particular focus on the technologies which are used to worl on water injections for the asphalt foam - anticipating further studies on this technique in the laboratory of a pilot plant to produce some asphalt foam. The article also presents aspects related to the design, a summary of the main characteristics and properties of the performance and the uses of RAP and WMA are considered. Finally, some conclusions are drawn and recommendations made about the implementation of WMA in Colombia.
Extent
13 páginas
URI: https://repositorio.escuelaing.edu.co/handle/001/2504
Collections

Collections

AN - Grupo de Investigación en Geotecnia
References

Campagnoli, S.X. (2012, julio - septiembre). Alguna prácticas asociadas con el desarrollo sostenible en pavimentos. Revista Escuela Colombiana de Ingeniería, N°. 87. ISSN. 0121.5132, pp. 15-25.

Sabita (2011, September). Best practice guideline for warm mix asphalt manual 32.

Papacostas, A., Vuong, B., Sharp, K., Rebbechi, J., Boer, S. (2012, November). Review of overseas trails of warm mix asphalt pavements and current usage by austroads members austroads. Technical Report AP-T215-12. ISBN. 978-1-921991-57-8 ARRB Group.

Zaumanis, M. (2010). Warm mix asphalt investigation. Master of sciences thesis, Technical University of Denmark. In cooperation with: Danish Road Institute, Denmark.

http://es.astecinc.com/index.php?option=com_content&view=article&id=117&Itemid=188.

Wirtgen GmbH. Foamed bitumen - The innovative binding agent for road construction.

Malladi, H. (2012). Laboratory evaluation of warm mix asphalt technologies for moisture and rutting susceptibility. A thesis submitted to the graduate faculty of North Carolina State University in partial fulfillment of the requirements for the degree of Master of Science Raleigh, North Carolina.

Goh, Shu Wei (2012). Development and improvement of warm-mix asphalt technology. A dissertation, Submitted in partial fulfillment of requirements for the degree of Doctor of Philosophy in Civil Engineering. Michigan Technological University.

Bonaquist , R. (2011) . Mis design partices for warm mix asphalt. NCHRP Report 691. Transportation Research Board. Washington, D.C.

Chowdhury, A. Button, J.W. (2008). A review of warm mix asphalt, Report 473700-0008-01. Texas Transportation Institute, Texas A&M University. System Colleges Station, Texas.

Bower, N., Wen, H., Willoughby, K., Weston, J., DeVol, J. (2012, October). Evaluation of the performance of warm mix asphalt in Washington State WA-RD 781.1 - WSDOT Research Report.

Bower, N. (2011, December). Laboratory evaluation of performance of warm mix asphalt in Washington State. A thesis submitted in partial fulfillment of requirements for the degree of Master onf Science in Civil Engineering. Washington State University. Deparment of Civil and Environmental Engineering.

Ali, A. W., Abbas, A.R., Nazzal, M., Powers, D. (2012). LAboratory evaluation of foamed warm mix asphalt. International Journal of Pavement Research and Technology, vol. 5, N°. 2.

Estakhri, C., Button, J. & Alvarez, A. (2010, July). Field and laboratory investigation of warm mix asphalt in tExas. Texas Transportation Institute Texas A&M University System. FHWA/TX-10/0-5597-2

Kvasnak, A., Taylor, A., Signore, J.M. & Bikhari, S.A. (2010, July). Evaluation og gencor geen machine ultrafoam GX. NCAT Report 10-03. Final report.

Middleton, B. & Forfylow, R.W. (2008, abril). An evaluation of warm mix asphalt produced with the doble barrel green process. 7th International Conference on Managing Pavement Assets. Transportation Research Record, N°. 2126 (pp. 19-26)(Icmpa), Calgary.

Nortjè, W., Lewis, A. & Lewis, T. (2011, September). Full-scale implementation of warm mix asphalt in South Africa. 10th Conference on Asphalt Pavements for Southern Africa.

Prowell, B.D. (2007, julio). Warm mix asphalt. The International Technology Scanning Program. Summary Report. Submitted to American Trade Inititatives.

Jones, D., Wu, R. Barros, C. & Peterson, J. Research findings on the use of Rubbirized Warm Mix Asphalt in California.

Hicks, R.G., Cheng, D. & Teesdale, T. (2010). Assessment of warm mix technologies for use with asphalt rubber paving applications. California Integrated Waste Management Board - CIWMB. Tech Report 2010-103 TM. 5-14-2010.

Vargas-Nordcbeck, A. & Timm, D.H. (2013). Physical and structural characterization of sustainable asphalt pavement sections at the NCAT test track. NCAT Report 13-02. National Center for Asphalt Technology, Auburn University. February 18.

Croteau, J-M. & Tessier, B. (2008). Warm Mix Asphalt Paving Technologies: a Road Builder's perspective. Paper prepared for presentation at the "Warm Asphalt Technology as a Sustainable Strategy for Pavements" Session of the 2008 Annual Conference of the Transportation Association of Canada.

Hajj, E., Chia, Ch., Sebaaly, P. E., Kasozi, A. M. & Gibson, S. (2011). Properties of foamed warm-mix asphalt incorporating recycled asphalt pavement from two field projects-case studies. Revised: August 22.

Hill, B. (2011). Performance evaluation of warm mix asphalt mixtures incorporating reclaimed asphalt pavement - Thesis submitted in partial fulfillment of the requirements for the degree of master of science in Civil Engineering in the graduate Collage of the University of Illinois at Urbana-Champaign. Urbana, Illinois.

O'Sullivan, K. & Wall, P.A. (2009). The effects of warm mix asphalt additives on recycled asphalt pavement. A major qualifying project report submitted to the faculty of the Worcester Polyechnic Institute in partial fulfillment of the requirements for the degree of Bacherlor of Science. March 6.

Hanz, A.J. (2012). Quantifying the impacts of warm mix asphalt on constructability and performance. A dissertation submitted in partial fulfillment of the requirements for the degree of Doctor of Philosophy (Civil & Environmental Engineering) University of Wisconsin - Madison.

Gutiérrez, J.C. (2011). Definición, análisis y aplicabilidad de las mezclas asfálticas en tibio en Chile. Memoria para optar al título de ingeniero constructor. Chile.

Kristjánsdóttir, O. (2010, June). Warm Mix Asphalt Technology Adoption. NVF 33 Annual Meeting, Trondheim, Norway.

Tsai, J., Lai, Y.J., Tsai & Wang, Z. (2010, June). Evaluating constructability and properties of warm mix asphalt. Final report. Georgia Institute of Technology. The Georgia Department of Transportation. FHWA-GA-10-0904.

Sargand, S., Figueroa, J.L., Edwards, W., Al-Rawashdeh, A. (2009, September). Performance assessment of warm mix asphalt (WMA) pavements. Ohio Research Institute for Ttransportation and the Enviroment (Orite), FHWA/OH-2009/08.

Nishant Mukeshkumar, Sheth (2010). Evaluation of selected warm mix asphalt additives. University of Iowa. A thesis submitted in partial fulfillment of the requirements for the Master of Science degree in Civil and Enviromental Engineering in the Graduate Collage of the University of Iowa.

Diefenderfer, S.D., McGhee, K. K. & Donaldson B. M. (2007, April). Installation of warm mix asphalt projects in virginia. Virginia Transportation Research Council FHWA/VTRC 07-R25.

D'Angelo, J., Harm, E., Bartoszek, J., Baumgardner, G., Corrigan, M., Cowsert, J., Harman, T. et al. (2008, February). Warm -Mix Asphalt: European practice. American Trade Initiatives FHWA-PL-08-007.

Santucci, L. (2010). Warm Mix Asphalt hits the road, pavement technolgy update, Technology Transfer Program, Vol. 2, N°. 1.

Perkins, S.W. (2009, November). Synthesis of Warm Mix Asphalt Paving strategies for use in MOntana highway construction. FHWA/MT-09-009/8117-38. Final report. Prepared for the State of Montana Deparment of Transportation. In cooperation with the U.S. Department of Transportation, Federal Highway Administration.

Papacostas, A., Sharp, K. & Malone, S. (2013). Evaluation Protocol for Warm Mix Asphalt . ISBN 978-1-921991-83-7. Austroads Project No. TT1454. Austroads Publication N°. AP-T231-13, ARRB Group.

Worrall, J. & Choi, Y. (2007). Warm Mix Asphalt (WMA) Review. ISBN 978-1-921329-37-1. Austroads Project N°. TT1220. Austroads Publication N°. AP-T91/07. Austroads technical report.

Papascostas, A., Choi, Y., Malone, S. & Sharp, K. (2013). Laboratory evaluation of warm mix asphalt mixes. ISBN 978-1-921991-82-0. Austroads Project No. TT1454. Austroads Publication N°. AP-T230-13. Austroads technical report.

Carbone, T. & Alderson, A. (2010). Review of the environmental aspects of warm mix asphalt . ISBN 978-1-921709-30-2. Austroads Project N°. TT1454. Austroads Publication N°. AP-T163/10.

Papacostas, A., Sharp, K., Patrick, S., Thananjeyan, A. & Simpson, C. (2012). Field validation of warm mix asphalt pavements. ISBN 978-1-921991-56-1. Austroads Project N°. TT1454 Austroads. Publication N°. AP-T214-12. Project ARRB Group.

NCHRP (2012). Special mixture design considerations and methods for Warm Mix Asphalt: A supplement to NCHRP Report 673: A manual for design of Hot Mix Asphalt with Commentary. National Cooperative Highway Research Program. NCHRP Report 714, Washington, D.C.

Campagmoli. S. X. (2008). Tendencias actuales en el tecnología de los asfaltos espumados. VI Jornadas Internacionales del Asfalto. Bucaramanga, Colombia.