Publication: Obtención y caracterización de películas delgadas de Cu/Ni sobre sustratos de zamak medante la técnica de corriente pulsante inversa
Loading...
Authors
Abstract (Spanish)
Se presenta la implementación de la técnica de corriente pulsante inversa para electrodepositar películas delgadas Cu/Ni en forma de bicapa sobre sustratos de zamak, controlando los voltajes y tiempos de electrodeposición anódicos (VLow, TLow) y catódicos (VHigh, THigh), obteniendo como respuesta el monitoreo de la corriente anódica (ILow) y catódica (IHigh) en función del tiempo anódico (TLow) y catódico (THigh), respectivamente. Utilizando Microscopía de Fuerza Atómica (AFM) se observó que el control pulsante del voltaje durante el depósito permite obtener películas de Cu/Ni más densas y de tamaño de grano más fino, que las películas convencionales depositadas por la técnica de corriente directa. Se determinó la composición química de las capas usando la sonda de difracción de rayos X (EDX) con el microscopio electrónico de barrido.
Abstract (English)
The implementation of the Pulsating Inverse Current (PRC) technique is presented to electroplate Cu/Ni thin films on bi-layer zamak substrates, controlling the voltages and anodic electroplating (VLow, TLow) times and cathodic (VHigh, THigh) times, obtaining the monitoring of the anodic (ILow) and cathodic (IHigh) currents based on the anodic (TLow) and cathodic (THigh) times, respectively.
Using Atomic Force of Microscopy (AFM), it was observed that the pulsating control of the voltage during the deposit allowed obtaining denser and finer grain Cu/Ni films, rather than the conventional films deposited by the technique of direct current. Furthermore, The chemical composition of the layers was determined using the sounding of diffraction X ray (EDX) with the Scanning Electronic Microscope (SEM).
Extent
4 páginas
Collections
Collections
References
F. Lowenhweim, Modern Electroplating, 2ª ed. John Wiley & Sons, New York, 1963.
A.M. El-Sherik, U. Erb, J Page, Surf Coat Techn., 1996, 88, 70.
BRADLEY, P. E. Pulse plating of cobalt iron copper alloys. Institut de microsysteámes, ecole Polytechnique FeÂdeÂrale de Lausanne, Switzerland (2000).
BERGENSTOF. C. N. On texture formation of nickel electrodeposits. Institute of Process Technology, The Technical University of Denmark, DK-2800 Lyngby, Denmark. 1996.
S. Pagotto, C. Alvarenga, M. Ballester, Surf Coat Techn., 1999, 122, 10
How to cite
APA
Aperador Chaparro, William Arnulfo, Vera López, Enrique, Camargo López , Edwin Ariel , Laverde, Dionisio, Guerrero, John Wilver, Mora Parada, José Manuel, Álvarez, Miguel Ángel (2006). Obtención y caracterización de películas delgadas de Cu/Ni sobre sustratos de zamak medante la técnica de corriente pulsante inversa.
MLA
Aperador Chaparro, William Arnulfo, Vera López, Enrique, Camargo López , Edwin Ariel , Laverde, Dionisio, Guerrero, John Wilver, Mora Parada, José Manuel, Álvarez, Miguel Ángel. "Obtención y caracterización de películas delgadas de Cu/Ni sobre sustratos de zamak medante la técnica de corriente pulsante inversa." 2006.
Chicago
Aperador Chaparro, William Arnulfo, Vera López, Enrique, Camargo López , Edwin Ariel , Laverde, Dionisio, Guerrero, John Wilver, Mora Parada, José Manuel, Álvarez, Miguel Ángel. 2006. "Obtención y caracterización de películas delgadas de Cu/Ni sobre sustratos de zamak medante la técnica de corriente pulsante inversa."