Mostrando ítems 1-4 de 4

Adquisición de datos para un sistema de medición de la calidad del aire basado en IoT

Paz Penagos, Hernán; Moreno, Andres Alejandro; Poveda, José Noe (Latin American and Caribbean Consortium of Engineering Institutions (LACCEI)Jamaica, 2019)

The objective of the article is to present the design of the interface for the acquisition of data from the climatological station located in Guaymaral (latitude: 04º49'20.4""N, Longitude: 74º04'10.2""W; 2585 masl). This ...
Development of an Android mobile application for cycle users of the city of Bogotá D.C.

Paz Penagos, Hernán (LACCEI Latin American and Caribbean Consortium of Engineering InstitutionsBoca Raton Fl, United States., 2017)

This article is about the development of an application for smartphone phones with Android operating system for cycle route who transit in the city of Bogota D.C. The development of the project was achieved with the help ...
First approach to the modeling process of the sensor base on fiber optic for the detection of vehicular overload

Paz Penagos, Hernán; Campagnoli Martínez, Sandra Ximena; Gómez Rubiano, Juan Camilo; Currea Botero, Juan Sebastián; Martin Alfonso, Juan Felipe (LACCEI Latin American and Caribbean Consortium of Engineering InstitutionsLima, Perú., 2018)

In this article we explain the progress made in the theoretical modeling process of the fiber-based sensor of the detection of vehicular overload. The methodological design covers the first phase of revision of the state ...
Nuevas Ecuaciones de Inyección de Energía para Facilitar las Tareas de Automatización

Andrade Morales, Juan Manuel (LACCEI, Latin American and Caribbean Consortium of Engineering Institutions.Boca Raton Fl, United States., 2017)

La investigación propone nuevas ecuaciones de inyección de energía de los sistemas de control de variables continuas cuando se usa una interfaz digital PWM de modulación de ancho de pulso agregada a un microprocesador, ...

Envíos recientes

Adquisición de datos para un sistema de medición de la calidad del aire basado en IoT
...
Paz Penagos, Hernán | 2019

The objective of the article is to present the design of the interface for the acquisition of data from the climatological station located in Guaymaral (latitude: 04º49'20.4""N, Longitude: 74º04'10.2""W; 2585 masl). This work is part of the research project ""Measurement of local air quality, through an IoT system and advanced data analytics"", funded by the Colombian School of Engineering JULIO GARAVITO (Colombia). The methodology begins with the request of the data of the meteorological variables by the WIFI module and through the UART, to the server of the District Secretary of the Environment of Bogotá (http://201.245.192.252:81/StationInfo.aspx? ST_ID = 8), in Forward SDA. The received HTML file is saved in RESWIFI, and it is processed in order to debug the essential information of the variables. This information is then sent, via serial interface, to the node of the LoRaWAN network. The results of the design of the interface allowed to receive information of the variables particulate material (PM10 and PM2.5), speed and direction of the wind (Vel10M and Dir10M), temperature (T2m, T8m and T20m), relative humidity of the environment (RH), atmospheric barometric pressure (PB), solar radiation (RS), precipitation, ozone (O3), nitrogen monoxide (NO) and nitrogen oxides (NOX), with which the historical behavior of three of them was graphed: PM10, O3 and nitrogen dioxide (NO2), which are air pollutants.

LEER
Development of an Android mobile application for cycle users of the city of Bogotá D.C.
...
Paz Penagos, Hernán | 2017

This article is about the development of an application for smartphone phones with Android operating system for cycle route who transit in the city of Bogota D.C. The development of the project was achieved with the help of a methodological process, which was structured in four phases, these phases are described: the general context of applications developed in Android, needs identification of cyclical, mobile application development, validation and results; The coupling of these stages allowed to analyze the current situation and to design, program and implement an application according to the needs of the study population, in order to encourage the use of the bicycle as a means of transport for sustainable mobility. The application developed includes the following functionalities: georeferenced maps of the network of cycle route and bicycle route of the city of Bogota, by selecting a source point and a destination point a route is generated, which is drawn on a map, which has in The possibility of users having information on the status of the cycle route through the qualification of the state of the road, lighting and signaling, search for parking cycle, creation of public or private points of interest such as bicycle stores, Workshops of repair, hydration points, among others, history of the route made with information of the time spent in making the route and access to the information of events and tips.

LEER
First approach to the modeling process of the sensor base on fiber optic for the detection of vehicular overload
...
Paz Penagos, Hernán | 2018

In this article we explain the progress made in the theoretical modeling process of the fiber-based sensor of the detection of vehicular overload. The methodological design covers the first phase of revision of the state of art, and the second, of experimentation of laboratory and simulation to obtain a first approach to the model of the sensor. The investigation will be carried out for static loads corresponding to vehicles C2 of maximum vehicular weight of 17 Tons, distributed on the simple directional axis and on a simple non-directional axis. The selection of the type of signal and its most suitable parameters are presented as partial results; so, like the behavior of the fiber optic against efforts.

LEER
Nuevas Ecuaciones de Inyección de Energía para Facilitar las Tareas de Automatización
...
Andrade Morales, Juan Manuel | 2017

La investigación propone nuevas ecuaciones de inyección de energía de los sistemas de control de variables continuas cuando se usa una interfaz digital PWM de modulación de ancho de pulso agregada a un microprocesador, para facilitar las tareas de automatización. Estas nuevas ecuaciones deben ser conocidas por estudiantes e ingenieros debido a que existe una gran posibilidad de hacer aplicaciones de control automático rápidas, baratas y eficientes que deben estar al alcance de todos. Los libros actuales de control automático son un compendio de modelamiento matemático, ninguno muestra una integración entre modelamiento matemático, análisis físico, electrónica digital, electrónica análoga, electrónica de potencia y diseño de algoritmos en lenguaje de máquina. Esta investigación hace un esfuerzo por integrar los anteriores conocimientos y aporta la deducción de nuevas ecuaciones para poder hacer realidad las estrategias de control proporcional integral (PI) y proporcional integral derivativo (PID) en un microprocesador que posee una interfaz digital PWM.

LEER

‹›

Repositorio Digital

Tipo de Material

Adquisición de datos para un sistema de medición de la calidad del aire basado en IoT

Development of an Android mobile application for cycle users of the city of Bogotá D.C.

First approach to the modeling process of the sensor base on fiber optic for the detection of vehicular overload

Nuevas Ecuaciones de Inyección de Energía para Facilitar las Tareas de Automatización

Envíos recientes

Adquisición de datos para un sistema de medición de la calidad del aire basado en IoT

Development of an Android mobile application for cycle users of the city of Bogotá D.C.

First approach to the modeling process of the sensor base on fiber optic for the detection of vehicular overload

Nuevas Ecuaciones de Inyección de Energía para Facilitar las Tareas de Automatización

Tipo de Material

Adquisición de datos para un sistema de medición de la calidad del aire basado en IoT ﻿

Development of an Android mobile application for cycle users of the city of Bogotá D.C. ﻿

First approach to the modeling process of the sensor base on fiber optic for the detection of vehicular overload ﻿

Nuevas Ecuaciones de Inyección de Energía para Facilitar las Tareas de Automatización ﻿

Envíos recientes

Adquisición de datos para un sistema de medición de la calidad del aire basado en IoT

Development of an Android mobile application for cycle users of the city of Bogotá D.C.

First approach to the modeling process of the sensor base on fiber optic for the detection of vehicular overload

Nuevas Ecuaciones de Inyección de Energía para Facilitar las Tareas de Automatización

Adquisición de datos para un sistema de medición de la calidad del aire basado en IoT

Development of an Android mobile application for cycle users of the city of Bogotá D.C.

First approach to the modeling process of the sensor base on fiber optic for the detection of vehicular overload

Nuevas Ecuaciones de Inyección de Energía para Facilitar las Tareas de Automatización