Mostrar el registro sencillo del ítem

dc.contributor.advisorTorres, Nancy
dc.contributor.authorMozo Mozo, Néstor Ariel
dc.date.accessioned2021-11-10T19:32:53Z
dc.date.available2021-11-10T19:32:53Z
dc.date.issued2021
dc.identifier.urihttps://repositorio.escuelaing.edu.co/handle/001/1830
dc.description.abstractEl proyecto de grado titulado "GENERACIÓN Y VALIDACIÓN DE ÁBACOS PARA DIMENSIONAR VIGAS ALVEOLADAS TOMANDO COMO BASE PERFILES COMERCIALES EN COLOMBIA" tuvo como alcance el cálculo de la serie de ábacos de dimensionamiento de vigas alveoladas con aberturas hexagonales, tomando como base la serie de perfiles IPE y HEA, con calidad de acero bajo especificación ASTM A36 y ASTM A572 Gr 50 y límite de flecha L/250 y L/300. También, la validación de los resultados obtenidos mediante ensayos a flexión de cinco especímenes representativos de los cuales se obtuvieron registros de carga y deflexión en el centro de la luz. Todo lo anterior, con la finalidad de brindar herramientas que faciliten el análisis y diseño de estos elementos, además de impulsar el uso del acero dentro de la construcción en Colombia.spa
dc.description.abstractThe scope of the degree project entitled "GENERATION AND VALIDATION OF ABICS TO SIZE HINGED BEAMS BASED ON COMMERCIAL PROFILES IN COLOMBIA" was the calculation of the series of abacuses for the sizing of hollow beams with hexagonal openings, based on the IPE and HEA series of profiles, with steel quality under ASTM A36 and ASTM A572 Gr 50 specifications and L/250 and L/300 deflection limit. Also, the validation of the results obtained through bending tests of five representative specimens from which load and deflection records were obtained in the center of the span. All of the above, with the purpose of providing tools to facilitate the analysis and design of these elements, in addition to promoting the use of steel in construction in Colombia.eng
dc.format.extent187 páginasspa
dc.format.mimetypeapplication/pdfspa
dc.language.isospaspa
dc.publisherEscuela Colombiana de Ingeniería Julio Garavitospa
dc.titleGeneración y validación de abacos para dimensionar vigas alveoladas tomando como base perfiles comerciales en Colombiaeng
dc.typeTrabajo de grado - Maestríaspa
dc.type.versioninfo:eu-repo/semantics/publishedVersionspa
oaire.accessrightshttp://purl.org/coar/access_right/c_abf2spa
oaire.versionhttp://purl.org/coar/version/c_970fb48d4fbd8a85spa
dc.description.degreelevelMaestríaspa
dc.description.degreenameMagíster en Ingeniería Civilspa
dc.identifier.urlhttps://catalogo.escuelaing.edu.co/cgi-bin/koha/opac-detail.pl?biblionumber=22793
dc.publisher.programMaestría en Ingeniería Civilspa
dc.relation.indexedN/Aspa
dc.rights.accessrightsinfo:eu-repo/semantics/openAccessspa
dc.subject.armarcIngenieria estructutas
dc.subject.armarcVigas alveoladas,
dc.subject.armarcEstructuras
dc.subject.proposalIngeniería de estrucututasspa
dc.subject.proposalStructural engineeringeng
dc.subject.proposalEstructutasspa
dc.subject.proposalStructural engineeringeng
dc.subject.proposalVigas alveoladasspa
dc.subject.proposalHollow beamseng
dc.subject.proposalStructureseng
dc.type.coarhttp://purl.org/coar/resource_type/c_bdccspa
dc.type.contentTextspa
dc.type.driverinfo:eu-repo/semantics/masterThesisspa
dc.type.redcolhttps://purl.org/redcol/resource_type/TMspa


Ficheros en el ítem

Thumbnail
Thumbnail

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem