Publication:
The evolution of the microstructure and properties of ageable Al-Si-Zn-Mg alloy during the recycling of milling chips through powder metallurgy

Thumbnail Image
Files

Files

Primary The evolution of the microstructure and properties of ageable Al-Si-Zn-Mg alloy during the recycling of milling chips through powder metallurgy _ Elsevier Enhanced Reader.pdf (7.26 MB)
View Statistics
Reference Managers
Mendeley
Indexers
Google Scholar CORE
QR Code
QR Code
Authors

Authors

Pulido-Suárez, P.A.
Uñate-González, K.S.
Tirado-González, J.G.
Esguerra-Arce, A.
Esguerra-Arce, J.
Abstract (Spanish)
Although long/continuous metallic chips are easily recycled by melting, this is not the casefor discontinuous milling chips. The present study aimed to reduce waste generation andto facilitate the use of this byproduct in order to obtain a metallic-oxide composite. Chipswere collected after machining Al-Si-Zn-Mg alloy parts, and powders were obtained throughgrinding processes. Grinding was performed at 45, 69, and 94 h, with grinding bodies/chipsvolume ratios of 6:1, 8:1, 10:1 and 12:1. The resulting powders were characterized by scanningelectron microscopy, laser granulometry, and X-ray diffraction. After grinding, the parti-cles were compacted and sintered, and hardness was evaluated. It was found that metallicpowder is formed through plastic deformation, hardening, fracture, and dynamic recrystal-lization. It was possible to obtain samples with lower apparent density and higher hardnessby powder metallurgy from Al-Si-Zn-Mg alloy chips than from the bulk. Powder was obtainedafter grinding, and samples were obtained by compacting and sintering. The higher hard-ness value was attributed to the presence of Al2O3formed in the particles during grinding,which acts as a second reinforcing phase in the sintered samples, and as a retardant ofintermetallic phase growing
Extent
9 páginas
Rights

This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).

URI: https://repositorio.escuelaing.edu.co/handle/001/1595
Collections

Collections

AI - Centro de Investigación en Manufactura y Servicios – CIMSER
References

Hirsch J. Recent development in aluminum for automotiveapplications. Trans Nonferrous Met Soc China2014;24(7):1995–2002,http://dx.doi.org/10.1016/S1003-6326(14)63305-7

Zhang X, Chen Y, Hu J. Recent advances in the developmentof aerospace materials. Prog Aerosp Sci 2018;97:22–34,http://dx.doi.org/10.1016/j.paerosci.2018.01.001

Abdel-Gawad SA, Osman WM, Fekry AM. Characterizationand corrosion behavior of anodized aluminum alloys formilitary industries applications in artificial seawater. J SurfInterfaces Mater 2019;14:314–23 http://dx.doi.org/10.1016/j.surfin.2018.08.001

Kirchener G. Der Aluminiumschrottmarkt im Wandel (inGerman). Aluminium 1994;70:340–3

Gronostajski JZ, Kaczmar JW, Marciniak H, Matuszak A.Direct recycling of aluminum chips into extruded products. JMater Process Tech 1997;64:149–56,http://dx.doi.org/10.1016/S0924-0136(96)02563-0

Gronostajski J, Marcinik H, Matuszak A. New methods ofaluminum and aluminum-alloy chips recycling. J MaterProcess Tech 2000;106:34–9,http://dx.doi.org/10.1016/S0924-0136(00)00634-8

Irfan Ab Kadir M, Sukri Mustapa M, Abdul Latif N, SahibMahdi A. Microstructural analysis and mechanicalproperties of direct recycling aluminium chips AA6061/Alpowder fabricated by uniaxial cold compaction technique.Procedia Eng 2017;184:687–94,http://dx.doi.org/10.1016/j.proeng.2017.04.141.

Seong-Hyeon H, Dong-Won L, Byoung-Kee K. Manufacturingof aluminum flake powder from foil scrap by dry ball millingprocess. J Mater Process Tech 2000;100:105–9,http://dx.doi.org/10.1016/S0924-0136(99)00469-0

Fuziana YF, Warikh ARM, Lajis MA, Azam MA, MuhammadNS. Recycling aluminium (Al 6061) chip through powdermetallurgy route. Mater Res Innov 2014;18(S6):354–8,http://dx.doi.org/10.1179/1432891714Z.000000000981

Rojas-Díaz LM, Verano-Jiménez LE, Mu ̃noz-García E,Esguerra-Arce J, Esguerra-Arce A. Production and characterization of aluminum powder derived frommechanical saw chips and its processing through powdermetallurgy. Powder Technol 2020;360:301–11,http://dx.doi.org/10.1016/j.powtec.2019.10.028

Afshari Elham, Ghambari Mohammad. Characterization ofpre-alloyed tin bronze powder prepared by recyclingmachining chips using jet milling. Mater Des 2016;103:201–8,http://dx.doi.org/10.1016/j.matdes.2016.04.064

Zhou Haiping, Hu Lianxi, Sun Yu , Zhang Hongbin, DuanCongwen, Yu Huan. Synthesis of nanocrystalline AZ31magnesium alloy with titanium addition by mechanicalmilling. Mater Charact 2016;113:108–16

Susila P, Sturm D, Heilmaier M, Murty BS, SubramanyaSarma V. Microstructural studies on nanocrystalline oxidedispersion strengthened austenitic(Fe–18Cr–8Ni–2W–0.25Y2O3) alloy synthesized by high energyball milling and vacuum hot pressing. J Mater Sci2010;45(17):4858–67,http://dx.doi.org/10.1007/s10853-010-4264-3

Williamson GK, Hall WH. X-ray line broadening from filedaluminium and wolfram. Acta Metall Mater 1953;1:22–31,http://dx.doi.org/10.1016/0001-6160(53)90006-6

Baghdadi A, Rajabi A, Mohamad Selamat NF, Sajuri Z, ZaidiOmar M. Effect of post-weld heat treatment on mechanicalbehaviour and dislocation density of friction stir weldedAl6061. Mat Sci Eng A 2019;754:728–34,http://dx.doi.org/10.1016/j.msea.2019.03.017

Tsai DS, Chin TS, Hsu SE, Hung MP. A simple method for thedetermination of lattice parameters from powder X-raydiffraction data. Mater T JIM 1989;30:474–9,http://dx.doi.org/10.2320/matertrans1989.30.474

Bacca M, Hayhurst DR, McMeeking RM. Continuous dynamicrecrystallization during severe plastic deformation. MechMater 2015;90:148–56,http://dx.doi.org/10.1016/j.mechmat.2015.05.008

Schmidt R, Mastin Scholze H, Stolle A. Temperatureprogression in a mixer ball mill. Int J Ind Chem 2016;7:181–6,http://dx.doi.org/10.1007/s40090-016-0078-8.

Kapila A, Lee T, Vivek A, Cooper R, Hetrick E, Daehn G. Spotimpact welding of an age-hardening aluminum alloy:process, structure and properties. J Manuf Processes2019;37:42–5, http://dx.doi.org/10.1016/j.jmapro.2018.11.006

Zhang JX, Sun HY, Li J, Liu WC. Effect of precipitation state onrecrystallization texture of continuous cast AA 2037aluminum alloy. Mater Sci Eng A 2019;754:491–501,http://dx.doi.org/10.1016/j.msea.2019.03.10

Zhang T, Shi-hong L, Yun-xin W, Gong H. Optimization ofdeformation parameters of dynamic recrystallization for7055 aluminum alloy by cellular automaton. TransNonferrous Met Soc China 2017;27:1327–37,http://dx.doi.org/10.1016/S1003-6326(17)60154-7.

Jimbo G, Zhao QQ, Yokoyana T, Taniyana Y. The grindinglimit and the negative grinding phenomenon. In: Proc. IIndWorld Congress of Particle Technology. Society of PowderTechnology. 1990. p. 305–12.

Boldyrev VV, Pavlov SV, Goldberg EL. Interrelation betweenfine grinding and mechanical activation. Int J Miner Process1996;44–45:181–5

Kumar S, Mathieux F, Onwubolu G, Chandra V. A novelpowder metallurgy-based method for the recycling ofaluminum adapted to a small island developing state in thePacific. Int J Environ Conscious Des Manuf 2007;13(3,4):1–22.ECM Press