Evaluación del efecto de tratamientos térmicos de envejecido en aceros inoxidables C+B+N
Trabajo de grado - Pregrado
2022
En este artículo se identificó la evolución de la microestructura de un acero
inoxidable modificado con B y N al aplicar tratamientos térmicos de envejecido
artificial con diferentes tiempos de sostenimiento. Se encontró que la dureza general del acero disminuyó entre 0,4 y 15 puntos HRC con el aumento en el tiempo
de sostenimiento del envejecido; Sugiriendo dos posibles comportamientos, el primero por un crecimiento en los precipitados de aproximadamente un orden de
magnitud con respecto al tamaño optimo reportado en la literatura, y el segundo
por la formacion de fases de bajas propiedades mecánicas como la fase sigma.
El presente estudio permite concluir que la composición planteada para el acero
hace que sea sensible a la temperatura debido a la pérdida acelerada de la dureza
con los diferentes tratamientos térmicos aplicados. In this article, artificial aging heat treatments with different holding times were applied to modified stainless steel with B and N specimens to characterize the
microstructure evolution. The results showed that hardness decreased between
0,4 and 15 HRC product of the increase in holding time. This behavior might be
caused by precipitate growth up to one order of magnitude compared to optimal
sizes reported in the literature. Other causes related to the possible formation of
phases with low mechanical properties such as the sigma phase. This information
allows us to conclude that the composition proposed for the steel makes it sensitive to temperature due to the accelerated loss of hardness with the different heat
treatments applied.
Descripción:
Sarmiento Viracachá, Daniel Ricardo-2022.pdf
Título: Sarmiento Viracachá, Daniel Ricardo-2022.pdf
Tamaño: 4.676Mb
PDFLEER EN FLIP
Descripción: Autorización.pdf
Título: Autorización.pdf
Tamaño: 620.1Kb
PDF
Título: Sarmiento Viracachá, Daniel Ricardo-2022.pdf
Tamaño: 4.676Mb
PDFLEER EN FLIP
Descripción: Autorización.pdf
Título: Autorización.pdf
Tamaño: 620.1Kb