Publication:
Development of improved porous asphalt mixtures with high porosity levels

Thumbnail Image
Files

Files

1-s2.0-S2666165923001680-main.pdf (5.95 MB)
View Statistics
Reference Managers
Mendeley
Indexers
Google Scholar CORE
QR Code
QR Code
Authors

Authors

Slebi Acevedo, Carlos José
Lastra González, Pedro
Indacoechea Vega, Irune
Castro Fresno, Daniel
Abstract (English)
Porous asphalt (PA) mixtures are gaining wider acceptance in pavement construction due to their benefits in terms of road safety, noise mitigation and stormwater management. Increasing demands, such as those imposed by climate change, require the design of mixtures that provide enhanced functional properties, while keeping the same durability of conventional porous asphalt mixtures. This study proposes different experimental PA mixes with higher air voids content and suitable structural capability than a conventional PA mixture. The functionality of the mixtures was evaluated in accordance with total and interconnected air voids, while the mechanical performance was assessed in terms of raveling resistance both in dry and wet conditions, tensile strength, and moisture sensitivity. The binder drain down was also verified. In a first stage, the experimental results were analyzed through descriptive and inferential statistics tests. As multiple responses were obtained, principal component analysis (PCA) and agglomerative hierarchical clustering (AHC) were applied to explore the asso ciation pattern among the test results and experimental designs. The study concluded that PA mixes with air voids content of up to approximately 28% and admissible values of resistance can be designed. The use of polymer modified binder (PMB) and the inclusion of fibers and hydrated lime (HL) was essential for the formulation of the mixes.
Extent
11 p.
URI: https://repositorio.escuelaing.edu.co/handle/001/3496
Collections

Collections

AN - Grupo de Investigación en Geotecnia
References

Abtahi, S.M., Sheikhzadeh, M., Hejazi, S.M., 2010. Fiber-reinforced asphalt-concrete - a review. Construct. Build. Mater. 24 (6), 871–877. https://doi.org/10.1016/j. conbuildmat.2009.11.009

Adam, J.F., Brooker, A.C., Carpenter, S.H., John, A.D., Huber, G., Jackson, D.C., Krugler, P.E., Lee, D., Mcdaniel, R.S., Mellott, D.B., Moulthrop, J.S., Shuler, S., Stroup-gardiner, M., Tam, K.K., 1998. OPEN-GRADED friction course: state of the practice. In: Transportation Research Circular E-C005. Transportation Research Circular E-C005, p. 20. December.

Alvarez, A.E., Martin, A.E., Estakhri, C., 2011. A review of mix design and evaluation research for permeable friction course mixtures. Construct. Build. Mater. 25 (3), 1159–1166. https://doi.org/10.1016/j.conbuildmat.2010.09.038

Arrieta, V.S., Maquilon, ´ J.E.C., 2014. Resistance to degradation or cohesion loss in Cantabro test on specimens of porous asphalt friction courses. Procedia - Soc. Behav. Sci. 162 (Panam), 290–299. https://doi.org/10.1016/j.sbspro.2014.12.210.

Bouayad, D., Emeriault, F., 2017. Modeling the relationship between ground surface settlements induced by shield tunneling and the operational and geological parameters based on the hybrid PCA/ANFIS method. Tunn. Undergr. Space Technol. 68, 142–152. https://doi.org/10.1016/j.tust.2017.03.011. November 2016.

Burgas, L., Colomer, J., Melendez, J., Gamero, F.I., Herraiz, S., 2021. Integrated UnfoldPCA Monitoring Application for Smart Buildings : an AHU Application Example.

Cadot, Y., Thiollet-scholtus, M., Samson, A., Barbeau, G., Cheynier, V., 2012. Characterisation of Typicality for Wines Related to Terroir by Conceptual and by Perceptual Representations . An Application to Red Wines from the Loire Valley. https://doi.org/10.1016/j.foodqual.2011.08.012. April

Calzada-Perez, M.A., Perez-Jimenez, F.E., 1984. Desarrollo y normalizacion ´ del ensayo de p´erdida por desgaste aplicado a la caracterizacion, ´ dosificacion ´ y control de mezclas bituminosas de granulometría abierta. Universidad de Cantabria.

Canal, B.M., Delta, E.N., 2020. Multivariate Analysis for Assessing Irrigation Water Quality : A Case Study of the Multivariate Analysis for Assessing Irrigation Water Quality : A Case Study of the Bahr Mouise Canal , Eastern Nile Delta. https://doi.org/ 10.3390/w12092537. September

Chen, J., Yao, C., Wang, H., Ding, Y., Xu, T., 2018a. Expansion and contraction of clogged open graded friction course exposed to freeze-thaw cycles and degradation of mechanical performance. Construct. Build. Mater. Chen, J., Yin, X., Wang, H., Ding, Y., 2018b. Evaluation of d

Chen, J., Yin, X., Wang, H., Ding, Y., 2018b. Evaluation of durability and functional performance of porous polyurethane mixture in porous pavement. J. Clean. Prod. 188, 12–19. https://doi.org/10.1016/j.jclepro.2018.03.297.

Elshamy, A.I., Mohamed, T.A., Essa, A.F., Abd-elgawad, A.M., 2019. Recent Advances in Kaempferia Phytochemistry and Biological Activity : A Recent Advances in Kaempferia Phytochemistry and Biological Activity : A Comprehensive Review (Issue October). https://doi.org/10.3390/nu11102396.

Fazaeli, H., Samin, Y., Pirnoun, A., Dabiri, A.S., 2016. Laboratory and field evaluation of the warm fiber reinforced high performance asphalt mixtures (case study Karaj – Chaloos Road). Construct. Build. Mater. 122, 273–283. https://doi.org/10.1016/j. conbuildmat.2016.05.139.

Gabriel, R., Valeriu, C., Ro, B., Vornicu, N., Stanc, S., 2020. Catena Soil Spatial Patterns Analysis at the Ancient City of Ibida (Dobrogea , SE Romania), via Portable X-Ray Fl Uorescence Spectrometry and M ultivariate Statistical Methods, vol. 189, pp. 1–12. https://doi.org/10.1016/j.catena.2020.104506. February

Garcia, A., Aboufoul, M., Asamoah, F., Jing, D., 2019. Study the influence of the air void topology on porous asphalt clogging. Construct. Build. Mater. 227, 116791 https:// doi.org/10.1016/j.conbuildmat.2019.116791.

Ghasemi, P., Aslani, M., Rollins, D.K., 2018. Principal Component Analysis-Based Predictive Modeling and Optimization of Permanent Deformation in Asphalt Pavement : Elimination of Correlated Inputs and Extrapolation in Modeling.

Gupta, A., Castro-fresno, D., Lastra-gonzalez, P., Rodriguez-hernandez, J., 2021a. Selection of fibers to improve porous asphalt mixtures using multi-criteria analysis. Construct. Build. Mater. 266, 121198 https://doi.org/10.1016/j. conbuildmat.2020.121198.

Gupta, A., Rodriguez-Hernandez, J., Castro-Fresno, D., 2019. Incorporation of additives and fibers in porous asphalt mixtures: a review. Materials 12 (19), 3156. https://doi. org/10.3390/ma12193156.

Gupta, A., Slebi-Acevedo, C.J., Lizasoain-Arteaga, E., Rodriguez-Hernandez, J., CastroFresno, D., 2021b. Multi-criteria selection of additives in porous asphalt mixtures using mechanical, hydraulic, economic, and environmental indicators. Sustainability 13 (4), 1–21. https://doi.org/10.3390/su13042146.

Hammes, G., Thives, L.P., Ghisi, E., 2018. Application of stormwater collected from porous asphalt pavements for non-potable uses in buildings. J. Environ. Manag. 222, 338–347. https://doi.org/10.1016/j.jenvman.2018.05.094.

Hu, Y., Cheng, F., Ji, Y., Yuan, B., Hu, X., 2020. Effect of aramid pulp on low temperature flexural properties of carbon fibre reinforced plastics. Compos. Sci. Technol. 192, 108095 https://doi.org/10.1016/j.compscitech.2020.108095.

Huurman, R.M., Mo, L., Woldekidan, M.F., 2010. Unravelling porous asphalt concrete towards a mechanistic material design tool. Road Mater. Pavement Des. 11 (3), 583–612. https://doi.org/10.1080/14680629.2010.9690295.

Lertwassana, W., Parnklang, T., Mora, P., Jubsilp, C., Rimdusit, S., 2019. High performance aramid pulp/carbon fiber-reinforced polybenzoxazine composites as friction materials. Compos. B Eng. 177, 107280 https://doi.org/10.1016/j. compositesb.2019.107280

Liu, M., Huang, X., Xue, G., 2016. Effects of double layer porous asphalt pavement of urban streets on noise reduction. Int. J. Sustain. Built Environ. 5 (1), 183–196. https://doi.org/10.1016/j.ijsbe.2016.02.001.

Lyons, K.R., Putman, B.J., 2013. Laboratory evaluation of stabilizing methods for porous asphalt mixtures. Construct. Build. Mater. 49, 772–780. https://doi.org/10.1016/j. conbuildmat.2013.08.076.

Ma, X., Li, Q., Cui, Y.-C., Ni, A.-Q., 2018. Performance of porous asphalt mixture with various additives. Int. J. Pavement Eng. 19 (4), 355–361. https://doi.org/10.1080/ 10298436.2016.1175560.

Manrique-Sanchez, L., Caro, S., Ar´ ambula-Mercado, E., 2018. Numerical modelling of ravelling in porous friction courses (PFC). Road Mater. Pavement Des. 19 (3), 668–689. https://doi.org/10.1080/14680629.2016.1269661.

Margaritis, A., Road, B., Soenen, H., Fransen, E., Pipintakos, G., 2020. Identification of Ageing State Clusters of Reclaimed Asphalt Binders Using Principal Component Analysis (PCA) and Hierarchical Cluster Analysis (HCA) Based on ChemoRheological Parameters. https://doi.org/10.1016/j.conbuildmat.2020.118276. February

Mo, L.T., Huurman, M., Wu, S.P., Molenaar, A.A.A., 2011. Bitumen – Stone Adhesive Zone Damage Model for the Meso-Mechanical Mixture Design of Ravelling Resistant Porous Asphalt Concrete, vol. 33, pp. 1490–1503. https://doi.org/10.1016/j. ijfatigue.2011.06.003

Mohd Shukry, N.A., Hassan, N.A., Abdullah, M.E., Hainin, M.R., Md Yusoff, N.I., Jaya, R. P., Mohamed, A., 2018. Effect of various filler types on the properties of porous asphalt mixture. IOP Conf. Ser. Mater. Sci. Eng. 342 (1) https://doi.org/10.1088/ 1757-899X/342/1/012036.

Nielsen, C., 2006. Durability of Porous Asphalt-International Experience. Technical Note 41 Copenhagen, Denmark: Danish Road Institute (DRI).

Park, P., El-Tawil, S., Park, S.Y., Naaman, A.E., 2015. Cracking resistance of fiber reinforced asphalt concrete at -20 ◦c. Construct. Build. Mater. 81, 47–57. https://doi. org/10.1016/j.conbuildmat.2015.02.005.

Putman, B.J., Asce, A.M., Kline, L.C., 2012. Comparison of Mix Design Methods for Porous Asphalt Mixtures, vol. 24, pp. 1359–1367. https://doi.org/10.1061/(ASCE) MT.1943-5533.0000529. November.

Ranieri, V., Sansalone, J.J., Shuler, S., Ranieri, V., Sansalone, J.J., Shuler, S., David, V.R., 2011. Relationships Among Gradation Curve , Clogging Resistance , and Pore-Based Indices of Porous Asphalt Mixes Relationships Among Gradation Curve , Clogging Resistance , and Pore-Based Indices of Porous Asphalt Mixes. https://doi.org/ 10.3166/RMPD.11HS.507-525, 0629.

Ren, S., Liu, X., Xu, J., Lin, P., 2021. Investigating the role of swelling-degradation degree of crumb rubber on CR/SBS modified porous asphalt binder and mixture. Construct. Build. Mater. 300, 124048 https://doi.org/10.1016/j.conbuildmat.2021.124048.

Rogers, D., Karan, P., Turner, I., Arnold, G., Alexander, D., 2019. Performance Benefits of Polymer Modified Bitumen Binders for Thin Surfacings.

Slebi-Acevedo, C.J., Castro-Fresno, D., Pascual-Munoz, ˜ P., Lastra-Gonzalez, ´ P., 2021. A combination of DOE–multi-criteria decision making analysis applied to additive assessment in porous asphalt mixture. Int. J. Pavement Eng. 0 (0), 1–14. https://doi. org/10.1080/10298436.2020.1859508.

Slebi-Acevedo, C.J., Castro-Fresno, D., Pascual-Munoz, ˜ P., Lastra-Gonzalez, ´ P., 2022. A combination of DOE – multi-criteria decision making analysis applied to additive assessment in porous asphalt mixture. Int. J. Pavement Eng. 23 (8), 2489–2502. https://doi.org/10.1080/10298436.2020.1859508.

Slebi-Acevedo, C.J., Lastra-Gonzalez, ´ P., Castro-Fresno, D., Bueno, M., 2020. An experimental laboratory study of fiber-reinforced asphalt mortars with polyolefinaramid and polyacrylonitrile fibers. Construct. Build. Mater. 248, 118622 https:// doi.org/10.1016/j.conbuildmat.2020.118622

Slebi-acevedo, C.J., Lastra-gonz´ alez, P., Indacoechea-vega, I., Castro-fresno, D., 2020. Laboratory assessment of porous asphalt mixtures reinforced with synthetic fibers. Construct. Build. Mater. 234 https://doi.org/10.1016/j.conbuildmat.2019.117224.

Tidjani, A., Redondin, M., Bouillaut, L., Daucher, D., 2020. Impact of Road Infrastructure Characteristics on Road Markings. https://doi.org/10.3850/981-973-0000-00-0.

Xu, B., Chen, J., Li, M., Cao, D., Ping, S., Zhang, Y., Wang, W., 2016. Experimental investigation of preventive maintenance materials of porous asphalt mixture based on high viscosity modified bitumen. Construct. Build. Mater. 124, 681–689. https:// doi.org/10.1016/j.conbuildmat.2016.07.122.

Xu, Q., Chen, H., Prozzi, J.A., 2010. Performance of fiber reinforced asphalt concrete under environmental temperature and water effects. Construct. Build. Mater. 24 (10), 2003–2010. https://doi.org/10.1016/j.conbuildmat.2010.03.012.