Publication:
Análisis de factores que influyen en la capacidad de carga de pilotes cimentados en rocas

Thumbnail Image
Files

Files

Primary Joseph, César-2024 (5.79 MB)
 Artículo.xls (478.5 KB)
 Anexos.rar (182.98 MB)
 Autorización.pdf (702.1 KB)
View Statistics
Reference Managers
Mendeley
Indexers
Google Scholar CORE
QR Code
QR Code
Authors

Authors

Joseph Remolina, César Cristhian
Abstract (Spanish)
El objetivo del estudio fue determinar la influencia de factores como la geometría del pilote, las propiedades de los materiales (concreto – roca) y las condiciones de construcción, que intervienen en la capacidad de carga en pilotes cimentados en roca.
Abstract (English)
The objective of the study was to determine the influence of factors such as pile geometry, material properties (concrete – rock) and construction conditions, which affect the load-bearing capacity of piles founded on rock.
Director

Advisors/Directors

Rodríguez Pineda, Carlos Eduardo
Extent
176 páginas.
URI: https://repositorio.escuelaing.edu.co/handle/001/3518
Collections

Collections

CF - Trabajos de Grado Maestría en Ingeniería Civil
References

Akgüner, C., & Kirkit, M. (2012). Axial bearing capacity of socketed single cast-in-place piles. Soils and Foundations, 52(1), 59–68. https://doi.org/10.1016/j.sandf.2012.01.012

Asem, P., Long, J. H., & Gardoni, P. (2018). Probabilistic Model and LRFD Resistance Factors for the Tip Resistance of Drilled Shafts in Soft Sedimentary Rock Based on Axial Load Tests. https://doi.org/10.1061/9780784481639.001

Barreto, A. P., Gonzáles, Y., & Echeverri, O. (2013). Evaluación Comparativa De La Capacidad De Carga En Cimentaciones Profundas. Fórmulas Analíticas Y Ensayos De. Boletín de Ciencias de La Tierra, 0(33), 93–110. Retrieved from https://revistas.unal.edu.co/index.php/rbct/article/view/35996

Jeong, S., Cho, H., Cho, J., Seol, H., & Lee, D. (2010). Point bearing stiffness and strength of socketted drilled shafts in Korean rocks. International Journal of Rock Mechanics and Mining Sciences, 47(6), 983–995. https://doi.org/10.1016/j.ijrmms.2010.05.002

Józefiak, K., Zbiciak, A., & Piotrowski, T. (2015). Numerical modelling and bearing capacity analysis of pile foundation. Procedia Engineering, 111, 356–363. https://doi.org/10.1016/j.proeng.2015.07.101

Jung, S. J., So, J. M., Kim, S. R., Ph, D., Kim, M. M., Ph, D., & Asce, M. (2008). Reliability Analysis of Bearing Capacity Equations for Drilled Shafts Socketed in Weathered Rock, 98–105.

Mackenzie Pertuz, O., & Vega Estrada, D. de J. (2021). Evaluación comparativa de los métodos analíticos de diseño de pilotes con respecto a las pruebas de carga en los barrios Manga, Bocagrande y Castillo grande de la ciudad de Cartagena de Indias. Recuperado de https://hdl.handle.net/11227/13518

Mahmoud, A. M. H., & Samieh, A. M. (2018). Side Resistance Assessment of Drilled Shafts Socketed into Rocks., 1(Johnston 1992). https://doi.org/10.1007/978-3-319-61642-1

Rezazadeh, S., & Eslami, A. (2017). Empirical methods for determining shaft bearing capacity of semi-deep foundations socketed in rocks. Journal of Rock Mechanics and Geotechnical Engineering, 0–11.

Seol, H., Jeong, S., & Kim, Y. (2009). Load transfer analysis of rock-socketed drilled shafts by coupled soil resistance. Computers and Geotechnics, 36(3), 446–453. https://doi.org/10.1016/j.compgeo.2008.08.012

Trojnar, K. (2013). Lateral stiffness of hybrid foundations: Field investigations and 3D FEM analysis. Géotechnique, 63(5), 355–367. https://doi.org/10.1680/geot.9.P.0778

Zertsalov, M. G., Nikishkin, M. V., & Khokhlov, I. N. (2017). On the Calculation of Bored Piles Under Axial Compressive Loads in Rocky Soils. Soil Mechanics and Foundation Engineering, 54(3), 143–149. https://doi.org/10.1007/s11204-017-9448-2

Zhang, L. (2004). Drilled Shafts in Rock: Analysis and Design. A.A.Balkema Publishers. Retrieved