Mostrar el registro sencillo del ítem
Mejoramiento de las propiedades de tensión en WPC de LDPE: HIPS/fibra natural mediante entrecruzamiento con DCP
dc.contributor.author | Delgado Tobón, Arnoldo Emilio | |
dc.contributor.author | Aperador Chaparro, William Arnulfo | |
dc.contributor.author | Gómez Rivera, William | |
dc.date.accessioned | 2021-12-14T17:04:20Z | |
dc.date.available | 2021-12-14T17:04:20Z | |
dc.date.issued | 2014 | |
dc.identifier.issn | 16785169 | |
dc.identifier.uri | https://repositorio.escuelaing.edu.co/handle/001/1921 | |
dc.description.abstract | Fibra de Retamo Liso (telinemonspessulana) fue mezclada en una matriz polimérica formada por: polietileno de baja densidad (LDPE) y poliestireno de alto impacto (HIPS) en relación 70:30 respectivamente. La fibra natural fue sometida a reducción de tamaño entre 1700 y 850 µm; se le realizó tratamiento superficial de mercerización; el contenido de humedad fue 0,17%. El análisis termo gravimétrico (TGA) muestra que la fibra tratada tiene estabilidad de 200,53 °C. La elaboración del compuesto se realizó en mezclador interno y la técnica de obtención de las probetas fue mediante moldeo por compresión. Se evaluó el efecto del agente entrecruzante peróxido de dicumilo (DCP) en compuestos con varios porcentajes de fibra: 0; 10; 25; 50 phr. La adición de DCP (1 phr) en los compuestos, mejora significativamente las propiedades de tensión con respecto a similares concentraciones de fibra; sin embargo, esta diferencia en los valores de las propiedades disminuye progresivamente cuando la cantidad de fibra se aproxima a 50 phr. El aumento en la concentración de fibra afecta negativamente las propiedades de tensión, con excepción del Módulo de Elasticidad y la Resistencia a la Fluencia. La causa principal es originada por la baja adhesión interfacial fibra natural-matriz polimérica, claramente evidenciada en las imágenes SEM. | spa |
dc.description.abstract | Straight Retamo Fiber (telinemonspessulana) was mixed in a polymer matrix formed by low density polyethylene (LDPE) and high impact polystyrene (HIPS) in a 70:30 ratio. The natural fiber was subjected to size reduction between 1700 and 850 µm; surface treatment mercerization was performed; the moisture content was 0.17%. The thermo gravimetric analysis (TGA) showed that the treated fiber has stability at 200.53 °C. The preparation of the compound was performed in an internal mixer with the samples being obtained by compression molding. The effect of crosslinking agent was evaluated: dicumyl peroxide (DCP) in compounds with various percentages of fiber: 0; 10; 25; 50 phr. The addition of DCP (1 phr) in the compounds significantly improved tensile properties compared to similar concentrations of fiber; however, this difference in property values progressively decreased when the amount of fiber approximated 50 phr. The increase in fiber concentration negatively affected the tensile properties, except for the modulus of elasticity and fluence resistance. The main cause is the low interfacial adhesion between the natural fiber and the polymer matrix, clearly evidenced in the SEM images. | eng |
dc.format.extent | 9 páginas. | spa |
dc.format.mimetype | application/pdf | spa |
dc.language.iso | spa | spa |
dc.publisher | Scielo | spa |
dc.source | https://www.scielo.br/j/po/a/D8fy6hV7TGXqM3jFhJBP4cj/?lang=es# | spa |
dc.title | Mejoramiento de las propiedades de tensión en WPC de LDPE: HIPS/fibra natural mediante entrecruzamiento con DCP | spa |
dc.title.alternative | Improvement of properties of tension in WPC of LDPE: HIPS/ natural fiber through crosslinking with DCP | eng |
dc.type | Artículo de revista | spa |
dc.type.version | info:eu-repo/semantics/publishedVersion | spa |
oaire.accessrights | http://purl.org/coar/access_right/c_abf2 | spa |
oaire.version | http://purl.org/coar/version/c_970fb48d4fbd8a85 | spa |
dc.contributor.researchgroup | Manufactura y Servicios | spa |
dc.relation.citationendpage | 299 | spa |
dc.relation.citationissue | 3 | spa |
dc.relation.citationstartpage | 291 | spa |
dc.relation.citationvolume | 24 | spa |
dc.relation.indexed | N/A | spa |
dc.relation.ispartofjournal | Polímeros | spa |
dc.relation.references | Nabi, D. & Jog, J. - Adv. Polym. Technol., 18, p.351 (1999). | spa |
dc.relation.references | Westman, M. P.; Fifield, L. S.; Simmons, K. L.; Laddha, S. G. & Kafentzis, T. A. - "Natural fiber composites: a review", U. S. Departament of Energy, Washington (2010). http://dx.doi.org/10.2172/989448 | spa |
dc.relation.references | Sullcahuamán, J. A.; Fuentes, C. A.; Mateo, M.; Pastor, A. V.; Castro, O. N. & Zabaleta, J. S. - "Materiales compuestos de cemento, papel reciclado, quitosano y refuerzo de fibras de sisal quimicamente modificadas", in:8º Congreso Iberoamericano de Ingeniería Mecánica, Lima (2007). | spa |
dc.relation.references | Mihaela, D,; Nicoleta, A.; Ghiurea, M.; Ilie, C.; Radovici, C. & Doina, M. - "Properties of Polymer Composites with Cellulose Microfibrils", en: Advances in Composites Materials-Ecodesign and Analysis, cap.5, Attaf, B (ed.), Intech Open Acces Publisher, Rijeka Croatia (2011). PMid:21567461. | spa |
dc.relation.references | Lee, B.; Kim, H. & Yu, W. - Fibers Polym., 10, p.83 (2009). http://dx.doi.org/10.1007/s12221-009-0083-z | spa |
dc.relation.references | Rosário, F.; Pachekoski, W.; Silveira, A.; Santos, S.; Júnior, H. & Casarin, A. S. - Polímeros, 21, p.90 (2011). http://dx.doi.org/10.1590/S0104-14282011005000021 | spa |
dc.relation.references | Spinacé, M.; Janeiro, L.; Bernardino, F.; Grossi, T. & De Paoli M. - Polímeros, 21, p.168 (2011). http://dx.doi.org/10.1590/S0104-14282011005000036 | spa |
dc.relation.references | Ngu, H. M.; Koubaa, A.; Cloutier, A.; Soulounganga, P. & Wolcott, M. - Composites Part A: Appl. Sci. Manuf., 41, p.131 (2010). | spa |
dc.relation.references | Chen, H.; Chen, T. & Hsu, C. - Holz als Roh und Werkstoff, 64, p.172 (2006). http://dx.doi.org/10.1007/s00107-005-0072-x | spa |
dc.relation.references | Balam-Cocom, R. J.; Duarte, S. & Canché, G. - Rev. Mexicana Ing. Quim., 5, p.39 (2006). | spa |
dc.relation.references | Cyras, V. - Rev. SAM, 2, p.18 (2005). | spa |
dc.relation.references | Mwaikambo, L. Y. & Ansell, M. P. - "The effect of chemical treatment on the properties of hemp, sisal, jute and kapok fibres for composite reinforcement", in: 2nd International Wood and Natural Fibre Composites Symposium, Kassel (1999). | spa |
dc.relation.references | Hashim, M.; Roslan, M.; Amin, A.; Ahmad, A. & Ariffin, S. - World. Acad. Sci. Eng. Technol., 68, p.1638 (2012). | spa |
dc.relation.references | Liu, L.; Yu, J.; Cheng, L. & Qu, W. - Composites Part A: Appl. Sci. Manuf., 40, p.669 (2009). http://dx.doi.org/10.1016/j.compositesa.2009.03.002 | spa |
dc.relation.references | Khan, J.; Khan, M. & Islam, R. - Fibers Polym., 13, p.1300 (2012). http://dx.doi.org/10.1007/s12221-012-1300-8 | spa |
dc.relation.references | Pires, E.; Merlini, C.; Al-Qureshi, H.; Salmória, G. & Barra, M. - Polímeros, 22, p.339 (2012). http://dx.doi.org/10.1590/S0104-14282012005000053 | spa |
dc.relation.references | Koning, C.; Van, D. M.; Pagnoulle, C. & Jerome, R. - Prog. Polym. Sci., 23, p.707 (1998). http://dx.doi.org/10.1016/S0079-6700(97)00054-3 | spa |
dc.relation.references | Tamboli, S.; Mhaske, S. & Kale, D. - Indian. J. Chem. Technol., 11, p.853 (2004). | spa |
dc.relation.references | Hieu, M. - "Compatibilization of rubber/polyethylene blends", M. Sc. Thesis, Lulea University of Technology, Sweden (2008). | spa |
dc.relation.references | Siong, S. - "Effects of polystyrene modified natural rubber on the properties of polypropylene -polystyrene blends", M. Sc. Thesis, University Sains Malaysia, Malaysia (2008). | spa |
dc.relation.references | Ghasemi, I. & Morshedian, J. - Iranian Polym. J., 12, p.119 (2003). | spa |
dc.relation.references | Ahmad, E. & Luyt, A. - Composites Part A: Appl. Sci. Manuf., 43, p.703 (2012). http://dx.doi.org/10.1016/j.compositesa.2011.12.011 | spa |
dc.relation.references | Mokoena, M.; Djokovic, V. & Luyt, A. - J. Materials Sci., 39, p.3403 (2004) http://dx.doi.org/10.1023/B:JMSC.0000026943.47803.0b | spa |
dc.relation.references | American Society for Testing and Materials - ASTM. - "ASTM D 2765-01: Standar Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics" (2001). | spa |
dc.relation.references | American Society for Testing and Materials - ASTM. - "ASTM D 638-02: Standar Test Method for Tensile Properties of Plastics" (2002). | spa |
dc.relation.references | 26. Betancourt, S.; Gañán, P.; Jímenez, A. & Cruz, L. J. - Rev. Latin. Metalurgia y Materiales, 1, p.215 (2009). | spa |
dc.relation.references | De La Cuesta, J.; Montoya, U.; Betancourt, S. & Álvarez, C. - Prospect, 9(2), p.75 (2011). | spa |
dc.relation.references | Rios, A. & Martín, A. - An. Mecánica Fractura, 1, p.163 (2007). | spa |
dc.rights.accessrights | info:eu-repo/semantics/openAccess | spa |
dc.subject.armarc | Termoplásticos | esp |
dc.subject.armarc | Thermoplastics | eng |
dc.subject.armarc | Materiales compuestos | esp |
dc.subject.armarc | Composite materials | eng |
dc.subject.proposal | TelineMonspessulana | spa |
dc.subject.proposal | compuesto de plástico y madera (WPC) | spa |
dc.subject.proposal | polietileno de baja densidad | spa |
dc.subject.proposal | poliestireno de alto impacto | spa |
dc.subject.proposal | peróxido de dicumilo | spa |
dc.subject.proposal | wood plastic composite (WPC) | eng |
dc.subject.proposal | low density polyethylene | eng |
dc.subject.proposal | high impact polystyrene | eng |
dc.subject.proposal | dicumyl peroxide | eng |
dc.type.coar | http://purl.org/coar/resource_type/c_6501 | spa |
dc.type.content | Text | spa |
dc.type.driver | info:eu-repo/semantics/article | spa |
dc.type.redcol | http://purl.org/redcol/resource_type/ART | spa |
Ficheros en el ítem
Este ítem aparece en la(s) siguiente(s) colección(ones)
-
AI - Centro de Investigación en Manufactura y Servicios – CIMSER [59]
Clasificación: B- Convocatoria 2018.