Mezclas asfálticas tibias. Énfasis en tecnologías de espumado y uso de RAP

Campagnoli Martinez, Sandra Ximena

dc.contributor.author	Campagnoli Martinez, Sandra Ximena
dc.date.accessioned	2023-07-24T19:15:13Z
dc.date.available	2023-07-24T19:15:13Z
dc.date.issued	2013
dc.identifier.issn	0121-5132	spa
dc.identifier.uri	https://repositorio.escuelaing.edu.co/handle/001/2504
dc.description.abstract	En este artículo se exponen los principales aspectos asociados con las tecnologías de mezclas asfálticas tibias (WMA, por sus siglas en inglés), se presentan sus ventajas y limitaciones, así como la forma más común de clasificación, describiéndolas de manera general, pero haciendo especial énfasis en aquellas tecnologías en que se trabaja con la inyección de agua para el espumado del asfalto - previniendo el desarrollo de estudios sobre este técnica - en los laboratorios de la Escuela Colombiana de Ingeniería, dada la disponibilidad de una planta piloto para fabricar asfalto espumado. Igualmente, se presentan aspectos relacionados con el diseño, se resumen las principales características y propiedades de desempeño, y se hacen consideraciones sobre el empleo del RAP en la WMA. Por último, se presentan algunas conclusiones y se dan recomendaciones orientadas a la implementación de las tecnologías de WMA en Colombia.	spa
dc.description.abstract	In this article the main aspects associated with warm asphalt mixtures technologies are detailed; we discuss tjeir advantages and limitations, as well as the most common ways of classifying, with general descriptions but with a particular focus on the technologies which are used to worl on water injections for the asphalt foam - anticipating further studies on this technique in the laboratory of a pilot plant to produce some asphalt foam. The article also presents aspects related to the design, a summary of the main characteristics and properties of the performance and the uses of RAP and WMA are considered. Finally, some conclusions are drawn and recommendations made about the implementation of WMA in Colombia.	eng
dc.format.extent	13 páginas	spa
dc.format.mimetype	application/pdf	spa
dc.language.iso	spa	spa
dc.publisher	Universidad Escuela Colombiana de Ingeniería Julio Garavito	spa
dc.rights.uri	https://creativecommons.org/licenses/by-nc-nd/4.0/	spa
dc.title	Mezclas asfálticas tibias. Énfasis en tecnologías de espumado y uso de RAP	spa
dc.title.alternative	Warm mixtures of asphalt (WMA). Focus on foam technologies and uses of RAP (Recycled Asphalt Pavement)	eng
dc.type	Artículo de revista	spa
dc.type.version	info:eu-repo/semantics/publishedVersion	spa
oaire.accessrights	http://purl.org/coar/access_right/c_abf2	spa
oaire.version	http://purl.org/coar/version/c_970fb48d4fbd8a85	spa
dc.contributor.researchgroup	Grupo de Investigación en Geotecnia	spa
dc.publisher.place	Bogotá	spa
dc.relation.citationendpage	55	spa
dc.relation.citationissue	91	spa
dc.relation.citationstartpage	43	spa
dc.relation.citationvolume	XXIII	spa
dc.relation.indexed	N/A	spa
dc.relation.ispartofjournal	Revista de la Escuela Colombiana de Ingeniería	eng
dc.relation.references	Campagnoli, S.X. (2012, julio - septiembre). Alguna prácticas asociadas con el desarrollo sostenible en pavimentos. Revista Escuela Colombiana de Ingeniería, N°. 87. ISSN. 0121.5132, pp. 15-25.	spa
dc.relation.references	Sabita (2011, September). Best practice guideline for warm mix asphalt manual 32.	spa
dc.relation.references	Papacostas, A., Vuong, B., Sharp, K., Rebbechi, J., Boer, S. (2012, November). Review of overseas trails of warm mix asphalt pavements and current usage by austroads members austroads. Technical Report AP-T215-12. ISBN. 978-1-921991-57-8 ARRB Group.	spa
dc.relation.references	Zaumanis, M. (2010). Warm mix asphalt investigation. Master of sciences thesis, Technical University of Denmark. In cooperation with: Danish Road Institute, Denmark.	spa
dc.relation.references	http://es.astecinc.com/index.php?option=com_content&view=article&id=117&Itemid=188.	spa
dc.relation.references	Wirtgen GmbH. Foamed bitumen - The innovative binding agent for road construction.	spa
dc.relation.references	Malladi, H. (2012). Laboratory evaluation of warm mix asphalt technologies for moisture and rutting susceptibility. A thesis submitted to the graduate faculty of North Carolina State University in partial fulfillment of the requirements for the degree of Master of Science Raleigh, North Carolina.	spa
dc.relation.references	Goh, Shu Wei (2012). Development and improvement of warm-mix asphalt technology. A dissertation, Submitted in partial fulfillment of requirements for the degree of Doctor of Philosophy in Civil Engineering. Michigan Technological University.	spa
dc.relation.references	Bonaquist , R. (2011) . Mis design partices for warm mix asphalt. NCHRP Report 691. Transportation Research Board. Washington, D.C.	spa
dc.relation.references	Chowdhury, A. Button, J.W. (2008). A review of warm mix asphalt, Report 473700-0008-01. Texas Transportation Institute, Texas A&M University. System Colleges Station, Texas.	spa
dc.relation.references	Bower, N., Wen, H., Willoughby, K., Weston, J., DeVol, J. (2012, October). Evaluation of the performance of warm mix asphalt in Washington State WA-RD 781.1 - WSDOT Research Report.	spa
dc.relation.references	Bower, N. (2011, December). Laboratory evaluation of performance of warm mix asphalt in Washington State. A thesis submitted in partial fulfillment of requirements for the degree of Master onf Science in Civil Engineering. Washington State University. Deparment of Civil and Environmental Engineering.	spa
dc.relation.references	Ali, A. W., Abbas, A.R., Nazzal, M., Powers, D. (2012). LAboratory evaluation of foamed warm mix asphalt. International Journal of Pavement Research and Technology, vol. 5, N°. 2.	spa
dc.relation.references	Estakhri, C., Button, J. & Alvarez, A. (2010, July). Field and laboratory investigation of warm mix asphalt in tExas. Texas Transportation Institute Texas A&M University System. FHWA/TX-10/0-5597-2	spa
dc.relation.references	Kvasnak, A., Taylor, A., Signore, J.M. & Bikhari, S.A. (2010, July). Evaluation og gencor geen machine ultrafoam GX. NCAT Report 10-03. Final report.	spa
dc.relation.references	Middleton, B. & Forfylow, R.W. (2008, abril). An evaluation of warm mix asphalt produced with the doble barrel green process. 7th International Conference on Managing Pavement Assets. Transportation Research Record, N°. 2126 (pp. 19-26)(Icmpa), Calgary.	spa
dc.relation.references	Nortjè, W., Lewis, A. & Lewis, T. (2011, September). Full-scale implementation of warm mix asphalt in South Africa. 10th Conference on Asphalt Pavements for Southern Africa.	spa
dc.relation.references	Prowell, B.D. (2007, julio). Warm mix asphalt. The International Technology Scanning Program. Summary Report. Submitted to American Trade Inititatives.	spa
dc.relation.references	Jones, D., Wu, R. Barros, C. & Peterson, J. Research findings on the use of Rubbirized Warm Mix Asphalt in California.	spa
dc.relation.references	Hicks, R.G., Cheng, D. & Teesdale, T. (2010). Assessment of warm mix technologies for use with asphalt rubber paving applications. California Integrated Waste Management Board - CIWMB. Tech Report 2010-103 TM. 5-14-2010.	spa
dc.relation.references	Vargas-Nordcbeck, A. & Timm, D.H. (2013). Physical and structural characterization of sustainable asphalt pavement sections at the NCAT test track. NCAT Report 13-02. National Center for Asphalt Technology, Auburn University. February 18.	spa
dc.relation.references	Croteau, J-M. & Tessier, B. (2008). Warm Mix Asphalt Paving Technologies: a Road Builder's perspective. Paper prepared for presentation at the "Warm Asphalt Technology as a Sustainable Strategy for Pavements" Session of the 2008 Annual Conference of the Transportation Association of Canada.	spa
dc.relation.references	Hajj, E., Chia, Ch., Sebaaly, P. E., Kasozi, A. M. & Gibson, S. (2011). Properties of foamed warm-mix asphalt incorporating recycled asphalt pavement from two field projects-case studies. Revised: August 22.	spa
dc.relation.references	Hill, B. (2011). Performance evaluation of warm mix asphalt mixtures incorporating reclaimed asphalt pavement - Thesis submitted in partial fulfillment of the requirements for the degree of master of science in Civil Engineering in the graduate Collage of the University of Illinois at Urbana-Champaign. Urbana, Illinois.	spa
dc.relation.references	O'Sullivan, K. & Wall, P.A. (2009). The effects of warm mix asphalt additives on recycled asphalt pavement. A major qualifying project report submitted to the faculty of the Worcester Polyechnic Institute in partial fulfillment of the requirements for the degree of Bacherlor of Science. March 6.	spa
dc.relation.references	Hanz, A.J. (2012). Quantifying the impacts of warm mix asphalt on constructability and performance. A dissertation submitted in partial fulfillment of the requirements for the degree of Doctor of Philosophy (Civil & Environmental Engineering) University of Wisconsin - Madison.	spa
dc.relation.references	Gutiérrez, J.C. (2011). Definición, análisis y aplicabilidad de las mezclas asfálticas en tibio en Chile. Memoria para optar al título de ingeniero constructor. Chile.	spa
dc.relation.references	Kristjánsdóttir, O. (2010, June). Warm Mix Asphalt Technology Adoption. NVF 33 Annual Meeting, Trondheim, Norway.	spa
dc.relation.references	Tsai, J., Lai, Y.J., Tsai & Wang, Z. (2010, June). Evaluating constructability and properties of warm mix asphalt. Final report. Georgia Institute of Technology. The Georgia Department of Transportation. FHWA-GA-10-0904.	spa
dc.relation.references	Sargand, S., Figueroa, J.L., Edwards, W., Al-Rawashdeh, A. (2009, September). Performance assessment of warm mix asphalt (WMA) pavements. Ohio Research Institute for Ttransportation and the Enviroment (Orite), FHWA/OH-2009/08.	spa
dc.relation.references	Nishant Mukeshkumar, Sheth (2010). Evaluation of selected warm mix asphalt additives. University of Iowa. A thesis submitted in partial fulfillment of the requirements for the Master of Science degree in Civil and Enviromental Engineering in the Graduate Collage of the University of Iowa.	spa
dc.relation.references	Diefenderfer, S.D., McGhee, K. K. & Donaldson B. M. (2007, April). Installation of warm mix asphalt projects in virginia. Virginia Transportation Research Council FHWA/VTRC 07-R25.	spa
dc.relation.references	D'Angelo, J., Harm, E., Bartoszek, J., Baumgardner, G., Corrigan, M., Cowsert, J., Harman, T. et al. (2008, February). Warm -Mix Asphalt: European practice. American Trade Initiatives FHWA-PL-08-007.	spa
dc.relation.references	Santucci, L. (2010). Warm Mix Asphalt hits the road, pavement technolgy update, Technology Transfer Program, Vol. 2, N°. 1.	spa
dc.relation.references	Perkins, S.W. (2009, November). Synthesis of Warm Mix Asphalt Paving strategies for use in MOntana highway construction. FHWA/MT-09-009/8117-38. Final report. Prepared for the State of Montana Deparment of Transportation. In cooperation with the U.S. Department of Transportation, Federal Highway Administration.	spa
dc.relation.references	Papacostas, A., Sharp, K. & Malone, S. (2013). Evaluation Protocol for Warm Mix Asphalt . ISBN 978-1-921991-83-7. Austroads Project No. TT1454. Austroads Publication N°. AP-T231-13, ARRB Group.	spa
dc.relation.references	Worrall, J. & Choi, Y. (2007). Warm Mix Asphalt (WMA) Review. ISBN 978-1-921329-37-1. Austroads Project N°. TT1220. Austroads Publication N°. AP-T91/07. Austroads technical report.	spa
dc.relation.references	Papascostas, A., Choi, Y., Malone, S. & Sharp, K. (2013). Laboratory evaluation of warm mix asphalt mixes. ISBN 978-1-921991-82-0. Austroads Project No. TT1454. Austroads Publication N°. AP-T230-13. Austroads technical report.	spa
dc.relation.references	Carbone, T. & Alderson, A. (2010). Review of the environmental aspects of warm mix asphalt . ISBN 978-1-921709-30-2. Austroads Project N°. TT1454. Austroads Publication N°. AP-T163/10.	spa
dc.relation.references	Papacostas, A., Sharp, K., Patrick, S., Thananjeyan, A. & Simpson, C. (2012). Field validation of warm mix asphalt pavements. ISBN 978-1-921991-56-1. Austroads Project N°. TT1454 Austroads. Publication N°. AP-T214-12. Project ARRB Group.	spa
dc.relation.references	NCHRP (2012). Special mixture design considerations and methods for Warm Mix Asphalt: A supplement to NCHRP Report 673: A manual for design of Hot Mix Asphalt with Commentary. National Cooperative Highway Research Program. NCHRP Report 714, Washington, D.C.	spa
dc.relation.references	Campagmoli. S. X. (2008). Tendencias actuales en el tecnología de los asfaltos espumados. VI Jornadas Internacionales del Asfalto. Bucaramanga, Colombia.	spa
dc.rights.accessrights	info:eu-repo/semantics/openAccess	spa
dc.rights.creativecommons	Atribución-NoComercial-SinDerivadas 4.0 Internacional (CC BY-NC-ND 4.0)	spa
dc.subject.proposal	Mezclas asfálticas tibias	spa
dc.subject.proposal	Asfalto espumado	spa
dc.subject.proposal	RAP	spa
dc.subject.proposal	Sostenibilidad	spa
dc.subject.proposal	Warm mixtures of asphalt	eng
dc.subject.proposal	Foam asphalt	eng
dc.subject.proposal	RAP	eng
dc.subject.proposal	Sustainability	eng
dc.type.coar	http://purl.org/coar/resource_type/c_2df8fbb1	spa
dc.type.content	Text	spa
dc.type.driver	info:eu-repo/semantics/article	spa
dc.type.redcol	http://purl.org/redcol/resource_type/ART	spa